Celdas de carga y montaje

• For use on steel or concrete weighbridges • Above ground or pit mounted • Stainless steel pin • Plated steel base • Simple installation • Low profile

• 5, 10, 20 and 30T capacity • Low profile • Tolerant of angular misalignment • Stainless steel mounting option • Jacking support system • Lift-off protection • Allowance for thermal expansion

• Capacities 2–50 kg • Painted steel construction • OIML R60 and NTEP approved • IP66 protection • Available with metric and UNC threads

• Capacities 5–500 kg • Stainless steel construction • OIML R60 and NTEP approved • IP68 protection

• Capacity range: 7.5–250 kg • Only 2.5–8 mm high • Very low profile • Aluminum construction • IP65 protection • 1000Ω input impedance • Provides freedom in rectangular scale size design • Matched output and current calibration circuitry • Eliminates need for spyder in typical bench top scales

• Capacities: 3 kg, 17 lbs, 23 lbs • Stainless steel construction • Insensitive to rotary dynamic forces • Single-point performance • Rotary speed to 13 rpm at 1m radius • Sealed wash down configuration

• Capacities up to 75k lbs • Use on tanks or silos • All steel construction • Low profile • Simple installation

• Capacities 3–90 kg • Unique adjustable tare load cancelling mechanism • Highly effective viscous damping • 6 Built-in overload limit stops in three directions • Weighing speed is much faster than standard load cell • IP65 protection

• Capacities: 50–2500 lbs • Hardened components at all bearing surfaces • Rocker pin load introduction • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Capacities: 0.5–5T • Hardened components at all load bearing surfaces • Rocker pin load introduction • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Rated capacities of 25 to 500 pounds • Tension or compression loading capabilities • Compact, low profile design • Sensorgage™ sealed to IP65 standards

• Rated capacities of 25 to 1000 pounds • Constructed of stainless steel • Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Exceeds NIST H-44 requirements • Provides optimum protection under adverse loading conditions • Sensorgage™ sealed to IP67 standards

• Rated capacities of 10 to 200 pounds • Stainless steel construction • Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Sensorgage™ sealed to IP67 standards

• Rated capacities of 100 to 2000 pounds • Unique shear beam design—aluminum construction • Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Ideal for situations exceeding the capabilities of similar “brick” design load cells • Trade certified for NTEP Class III:5000 divisions; Class IIIL:10000 divisions and OIML R60 3000 divisions • Sensorgage™ sealed to IP67 standards

• Capacity ranges of 1000 to 75,000 pounds • Mounts directly to the floor or structural support • Self-checking with provisions for thermal expansion and contraction • Insensitive to side loads and bending moments • High output—well suited to high deadload/low liveload applications • Load cells have matched outputs for multi-cell systems • Excellent combined error and repeatability • Accuracies exceed 0.1% with agitated loads • Integral conduit adaptor • Sensorgage™ sealed to IP67 standards

• Rated capacities of 10,000 to 75,000 pounds • High quality cast components • Unilink™ “floating” suspension system allows controlled floating of the scale deck • Incorporates model 65058 double-ended shear beam load cells • Sensorgage™ sealed to IP67 standards • Trade certified load cells for NTEP Class IIIL: 10000 divisions; Class III: 5000 divisions available

• Capacity: 1.5T to 30T • Alloy steel construction • Integrated overload protection for both tension and compression loading • Direct mounting of weight indicator • IP67 protection

• Capacity: 0.5–100T • Alloy steel construction • Universal load cell • Integrated overload protection (in compression) • Tension and compression loading

• Capacities: 250–2000 kg • Hardened components at all bearing surfaces • Rocker pin load introduction • Mechanical protection of the critical load introduction area • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Capacities: 30–50T • Hardened components at all bearing surfaces • Self-aligning construction • Stainless steel

• Simplifies load cell installation on tanks, silos, and other weighing vessels • 3 models suitable for load cell Models 3510, 3410, 3420, and 355 • Accepts load cells ranging in capacity from 5 to 5,000 kg • Permanent protection against load cell damage • Grounding strap provides low resistance path to minimize electrical potentials • Provision for thermal expansion, contraction and lift-off due to winds or collision • Cable gland protector prevents cable damage

• Capacities: 10–60T • Hardened components at all bearing surfaces • Self-aligning construction • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Serial interface (RS-485) • All settings made through the serial interface • Simple calibration, test and setting via HyperTerminal programming, or via Revere’s software • Automatic unit conversion, zero tracking • Gravity factor compensation • Tare function • Suitable for PC-base, μC, PLC application • Weight result format: six digits, eight announciators • Up to 64 nodes • ESD protection up to 15 kV

• USB (Universal Serial Bus) 2.0 interface • Weighing functionality: zero, tare, initial zero setting, automatic zero tracking, unit conversion, and more • Full setup and calibration through the USB interface • Simple calibration, test and setting via Revere’s software, or HyperTerminal program • Suitable for PC-based, or PLC-based applications • Gravity factor compensation • CE Compliance

• Capacity range: 250 kg to 60 ton • Low profile, stainless steel construction • Hermetically sealed, IP66 and IP68 • Meets OIML R-60 and NTEP 6000d • Outputs are matched to ensure easy and accurate parallel connection of multiple load cells

• Capacities: 0.25–10T • Hardened components at all load bearing surfaces • Rocker pin load introduction • Stainless steel construction • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Capacities: 20 to 50T • Anti-rotation design • Self-aligning construction • Hardened stainless steel • Allows ±5° alignment

• Capacities: 500 kg, 1T, 1.5T, 2T, and 2.5T • High side-load tolerance • Electroless nickel-plated-alloy tool steel • OIML C3 approval from 500 kg to 2.5T

• Capacities: 5–500 kg • Fully welded, stainless steel construction • Hermetically sealed, IP66 and IP68 • Certified to OIML R-60, 4000d and NTEP class IIIL, 10000 divisions • Current calibration output (SC version) ensures easy and accurate parallel connection of multiple load cells

• Capacities: 5–500 kg • Hardened components at all load bearing surfaces • Rocker pin load introduction • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

• Capacities: 500 to 20k lbs, 250 to 5000 kg • High side-load tolerance • Electroless nickel-plated-alloy tool steel • NTEP Class III 5000M for SQB, SQB-F and SQB-SS available from 1k to 10k lbs • SQB-SS stainless steel construction

• Capacities: 500–5000 kg • Hardened components at all bearing surfaces • Rocker pin load introduction • Stainless steel or nickel plated steel versions available • Built-in horizontal movement control and lift-off protection • Load cell (re)placement after installation of the mount

T-End Foot, Ball-In-Cup, and Rod End Bearings